Such a feature generally proves its worth in two situations. The first is that you want to communic

TC Electronic Konnekt 6 offers audio quality far above the price of its area. This is possible by using the DICE chip, namely TC Electronic nadir created for professional audio devices that use FireWire port. This chip is used DICE audio equipment for studio applications that require great sound both on record and at play sound material.
Ace in the Sleeve DICE is JetPLL technology, engineers also created from TC Electronic, which aims audio band jitter filtering for restoration as tighter synchronization of connected devices Digital audio production chain. An important factor in achieving this synchronization is precision digital clock that "motorizează" DICE chip, and hence derives an advantage not only for TC Electronic interfaces equipped with digital connections, but for the Konnekt 6: High precision digital clock brings high precision digital sound.
The difference in quality is audible: DICE interface and comes with a detailed JetPLL offers great sound, a three-dimensional instruments / voices recorded and played back on a soundstage airy, uncluttered, in which separate each sound element regains its right to existence own.
DIM button TC Electronic Konnekt 6 offers the user a number of features designed to ease and streamline nadir working with the audio interface. Much of this can be found in the "Setup" the TC Near control panel software. Thus, we find the volume control for the sound DIM sent to the monitor speakers. This setting is determined by how attenuated (dimmed) signal from monitor nadir speakers by pressing "dim" on the Konnekt 6.
Such a feature generally proves its worth in two situations. The first is that you want to communicate with someone without interrupting negative running in the background - possibly nadir talk to those they register, nadir or someone in the room where you are. In the event that you do not want to stop recording through the microphone or line input and headphone out is used at the microphone / instrument is expedient that pressing the "dim" has no effect on the signal at the output than the speaker, not on the headphone output. nadir
A second situation nadir in which the "dim" nadir can find a use is where you want to make quick comparisons between how a mix sounds to a certain volume and the way that sounds nadir at a lower volume (just reduced with the set of setup the TC Near). Both the mix, and for a premasterizare, instant switching between two levels of the same audio volume can be useful.
In the "Headphones" in the tab "Setup" nadir Application TC Near can select "Headphone Source" - obviously, the source signal is sent to the headphone output. There are two versions: "Main Mix" nadir and "DAW (FireWire Channels 3 +4). To explain the significance of these two types of selection nadir must be said about Konnekt 6 offers two ports that separate stereo output, which can be viewed by application of audio production as "Main Out 1/2" and "Headphones Out 1/2 ". nadir
Bus master mix send it to "Main nadir Out", ie to the speaker output. In case you want to send the helmet a separate submix (especially if it is used by singer / instrumentalist that you registered), nadir you will create an additional bus, to which you do send the tracks you want to submix of headset. You select the output options of this bus just send out "Headphones Out 1/2" and the headset will sound only submix. Good to know. Some audio production applications may exhibit special behavior with current drivers Konnekt 6 in the selection of TC Near control software sound source and headphone nadir output. Thus, changing this selection, it is necessary to switch the big button in the minimum volume, and only after passing the new selection becomes active. As this operation is done only once at the beginning of the session nadir records, I felt some impediment, but it is an issue that can confuse those who do not know.
Suppose singer / musician nadir that you register monitored by headset. You can use the Konnekt 6 reverb offered exclusively on the input signal which is sent to the headset, select in the "Reverb Output" nadir to "Reverb to Phones Output". Thus, the negative output for headphone submix, to which we add the reverb signal at the inputs, nadir you can create a custom monitor nadir mix for recorded interpreter, according to its preferences.
In case you do not need reverberation offered